ALSO MAKE SURE TO CLOSE THE ENCLOSURE DOOR DURING THE CYCLE
Slide your finger over "Slide to relax"
Touch gear icon (settings)
Touch on POWER FLUSH
This cycle will run for 45 minutes. For the first 7 minutes of this cycle, you will notice water begin to flow from your steamhead into the shower drain. This is normal and will allow any debris to be flushed out of the system. Once this portion of the cycle has completed, your generator will automatically switch to a steam session and run for the remaining 37 minutes or so.
Once the PowerFlush cycle has completed, The error should no longer appear on your control. Follow these steps to reset the clock for another 1000 minutes.
After the PowerFlush is completes please go to SETTINGS
Touch on Equipment
Touch on Scan For Devices
If for any reason you are unable to complete the Power Flush cycle and you receive the Low Water error again on your control and the water inlet screen has been cleared of any debris please call us at 800.776.0711.