We are looking at the SignaTouch screen:
Touch the Music icon to go to the SignaTouch Music screen
This is what the Music screen looks like:
Touch the Bluetooth icon to start pairing
This is what the screen looks like:
The SignaTouch is ready to pair. Next, open the Bluetooth settings on the device you are pairing. This example uses an Android phone. We are now looking at the Android phone screen:
Turn on Bluetooth and scroll down to Available devices. They are listed after the Paired devices. Look for the following entry in the list:
Touch the Thermasol_SLSR device to pair with it. If a confirmation box appears on the screen, select Pair. No PIN is required. Now scroll up the list to the Paired devices and verify that the Thermasol_SLSR device shows as Connected.
If it is not connected, you may need to touch it to connect
We are now looking at the SignaTouch screen. This is what the screen looks like:
If the volume is muted, as shown, touch the icon to unmute.
We are now looking at the Android phone screen:
Play some music using your favorite app. We are now looking at the SignaTouch screen:
From the SignaTouch Music screen, it is possible to Pause, Play, and Skip forward and back
Adjust the volume and equalizer controls
Returning to the shower
When returning to the shower, the SignaTouch control remembers the equalizer and volume settings, and automatically connects to any paired phone in range for Bluetooth audio streaming. This happens right after the User is selected.
There are two ways to disconnect the Bluetooth using the SignaTouch: Touch the Bluetooth icon on the Music screen, or touch the Power button. Touching the Aux music selection disconnects the Bluetooth, but also selects whatever music source is connected to the Aux input of the SLSR.
If audio is not heard, try touching the Bluetooth icon twice to disconnect and reconnect.
If audio is not heard, try touching the power button and selecting the user again. The volume setting is only sent to the SLSR when the user is selected or when the volume control is changed. If the SLSR was powered down without touching the control's power button, the volume settings shown on the screen may not have been sent to the SLSR.
If the playback controls do not work, it may be necessary to open the app from the phone screen and press play.
If the playback controls do not work, make sure the app playing the music is in the foreground.
If the phone does not automatically connect to the SignaTouch, make sure all other Bluetooth devices are disconnected from the phone before selecting the User.